Our customer support team is here to answer your questions. Ask us anything!
POLYGON PPR
March 28, 2021
SM COPPER FITTING
March 28, 2021

TILEMENT SPINDLE PIN

3 (Three) types Tilement Spindle Pin:
– Spindle Pin 38
– Spindle Pin 65
– Spindle Pin 125

Specification
 
  • The content of SP-50 is 200 g per one tube.
  • Plate size : 24 mm square for pin length of 25 mm – 75 mm, 30 mm square for pin length of 100 mm and over.
  • Plate thickness : 0.4 mm for pin length of 75 mm and under, 0.5 mm for pin length of 100 mm and over.
  • Diameter of pin : 1.6 mm dia. for pin length of 25 mm – 75 mm, 2.0 mm dia. for pin length of 100 mm and over.
  • The self-sticking type should be used for the temporary insulation.
  • When the spindle is installed on the vibratory surface such as the air chamber, the vibrator might cause fatigue rupture on the spindle. Contact us for advice before you start job.
  • Other type of Spindle Pin (fastener) and adhesive are available upon request.

Leave a Reply

Your email address will not be published.