Crane Copper 2

STRAIGHT LENGTH Copper Tubes

Tubes ordered as straight lengths are generally supplied as standard 6.0 metres for the Australian market, and 5.8 metre lengths to facilitate loading and unloading of 20 foot containers for export markets. Shorter lengths are available to suit standard requirements of other markets. Straight lengths if required, are usually supplied in the hard drawn and half hard tempers, Annealed straight lengths are available on request.

PANCAKE COILS

Available in standard lengths of 18 and 30 metres for the Australian market and 15 metres for export markets. These coils are supplied in the annealed form and are individually packed in a protective plastic sleeve then boxed in cardboard cartons for ease of handling and distribution.

AS 1571

Straight length

Annealed Coil

ASTM B280

Straight length

Annealed Coil

ASTM B88

Type K

Type L

Type M

 

Mueller 3

Streamline Copper Tube sets the standard for quality, consistency and service in the plumbing, refrigeration and HVAC industries. With a full line of both copper and plastic-coated copper tube for plumbing, air-conditioning, refrigeration, medical gas and other applications, our ongoing commitment to quality continues to make our copper tube products the preferred and specified brand of industry professionals.

 Product Availability & Highlights

  • Diameters from 1/8″ to 4-1/8″
  • Hard or soft lengths and soft coils
  • K, L, M & DWV for plumbing applications
  • ACR & Dehydrated Refrigeration Coils for HVAC/R applications
  • Oxygen/Medical Gas copper tube available

Specifications:

ASTM B280

ASTM B819

ASTM B88

AS 1571

For annealed Coil

Pancake coils
Pancake coils are the standard soft annealed coils and available in 15 metre lengths and on request. They are particularly suitable for merchandising as they are individually  packed in polythene bags. Because of their shape they are easy to be stored and handled.

Straight lengths
Available in 5.8 metre lengths and on request usually in “hard” temper or if specified – “soft” temper. Streamline Mueller has the capacity to cut lengths as short as 1/2″ accurately. Mill tolerances achievable are to within ± 0,0625″ (1.59mm).

Level wound coils
Level wound coils are especially adapted to long production runs and can be supplied in lengths over 300 metres (1000ft). The chief advantage is the consistency of diameter which enables the coil to be played off a mandrel for long production runs.

Supplied in ASTM:
ASTM Standard (1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1 1/8″, 1 1/4″, 1 3/8″, 1 5/8″, 2 1/8″, 2 3/8″, 2 5/8″, 3 1/8″, 4 1/8″).
BS Standard (British Standard) (6mm, 8mm, 10mm, 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm, 67mm, 76mm, 108mm, 133mm, 159mm.

 

Insulflex is a flexible and light weight elastomeric nitrile rubber material designed for thermal insulation. Insulflex insulation is generally black in colour, other colours are availble upon request. The product comes in tubing, roll and sheet form.The extruded flexible tubings are specially designed to fit the standard diameters of copper, steel and PVC pipings. Sheets are available in standards precut sizes or in rolls.

Use in:

Insulflex insulation is an expanded closed cell structure provides the ideal and most efficient vapour barrier for the prevention of condensation or frost formation on cooling systems, chilled water and refrigerant lines.

Insulflex insulation also prevent retards heat loss for hot water plumbing and heating, dual temperature piping systems. It protects pipes by acting as a vibration damper and giving protection against corrosion by atmospheric and industrail environment.

Insulflex insulation with its inherent flexibility makes it ideally suited for the insulation of large surface area such as tanks, irregular shaped vessels, air-ducts and large diameter pipes.

Specification:

 

Characteristics and Advantages :

Insulflex insulation material has been specially designed to provide the following features :

  • Its low thermal conductivity (k Value) which makes it highly efficient and effective in the insulation of cooling or heating systems.
  • The hermatic blister closed cell structure forms an impermeable layer which is in itself a good vapour barrier.
  • It is suitable for appliction within the temperature range of –40 deg to 105 deg C.
  • The material has been specially compounded to be self extinguishing in nature.
  • Insuflex has excellent ozone and ultraviolet ray resistant.
  • It is CFC, chlorine and fibre free and does not cause skin allergy.
  • It is also inert to majority of chemical agents and neutral to pipe metals.
  • The extreme flexibility of material makes installation fast, easy and economical.
  • It is able to withstand tearing, rough handling and severe site conditions.
  • Much lesser space is needed for Insulflex as a thinner wall is required due to its low k value as compared to other types of insulation.
  • The smooth surface of insulflex material gives the finished insulation a net aesthetic appearance.No coating is needed on most indoor installations.